2024 RAA ONLINE EVENTS | RECORDING ACCESS

Mon, 15 Jul, 6pm 2024 - 8 Aug, 12am 2034 AEST  ·  Event info

Choose your tickets

 
Discount details
  1. RAA In Practice - Trent Jansen discusses Ngumu Janka Warnti (all made from rubbish), a collaborative project with Nyikina man Johnny Nargoodah

    RAA In Practice - Trent Jansen discusses Ngumu Janka Warnti (all made from rubbish), a collaborative project with Nyikina man Johnny Nargoodah ticket

    Trent is a frequent collaborator with indigenous creators due to his immense respect for cultural heritage. In this session, Trent speaks about the project he undertook with Nyikina man Johnny Nargoodah ‘Ngumu Janka Warnti (all made from rubbish)’. TRENT JANSEN Trent Jansen is a designer based in Thirroul, Australia, and Lecturer at the University of New South Wales, Art & Design, Sydney Australia. Jansen gained his PhD from the University of Wollongong under renowned Australian art historian Ian McLean, and his Bachelor of Design from the College of Fine Arts, University of New South Wales in Sydney. He spent part of his undergraduate degree in the Department of Art and Design at the University of Alberta in Edmonton, Canada. After a period working under Marcel Wanders in Amsterdam, Jansen returned to Australia to set up a design studio in Sydney, before moving his practice to Thirroul on the New South Wales South Coast. Jansen applies his method of Design Anthropology to the design of limited edition and one-off pieces for clients including the Molonglo Group, Charter Hall and Mirvac. This approach is also applied to the design of products and furniture for manufacturers Moooi, DesignByThem and Tait. Jansen was one of the cofounders of Broached Commissions and is represented by Broached Commissions for Broached in-house commissions. “Trent has a great deal of respect for cultural heritage and is extraordinarily thorough in incorporating cultural identity and history into his works ... his collaboration with Broached Commissions has the same kind of take on defining the Australian design identity as Droog has done for the Dutch design identity” Marcel Wanders – Mezzanine, 2015. In this session, Trent will speak about the project he undertook with Nyikina man Johnny Nargoodah ‘Ngumu Janka Warnti (all made from rubbish)’. trentjansen.com instagram.com/trentjansenstudio Trent Jansen is represented by Gallery All in the USA and China and Galleria Rossana Orlandi in Europe NGUMU JANKA WARNTI (ALL MADE FROM RUBBISH), A COLLABORATIVE PROJECT WITH NYIKINA MAN JOHNNY NARGOODAH Words by Trent Jansen and Johnny Nargoodah Johnny Nargoodah is a Nyikina man who has spent much of his life working with leather as a saddler on remote cattle stations, and Trent Jansen is an avant-garde object designer from Thirroul in New South Wales, who regularly experiments with leather and animal pelts in his collectable design work. Partu (2020), the Walmajarri word for ‘skin’, is their collaborative project experimenting with the combination of these disparate sensibilities. This body of work is designed by Trent and Johnny and both designers have their own lens through which to view the processes and inspirations governing these works: From Trent’s point of view, this project is an experiment in the generation of hybrid material culture. Material Culture Theory says that the artefacts we create embody the values, ideas, attitudes and assumptions (the culture) of the creator. But what if an artefact is created collaboratively by two people from different cultures? Does this artefact exhibit the cultural values of both authors? If so, how do these cultural values manifest? From Johnny’s point of view, the project has a few different aspects to it: Making – “we use rubbish, recycled frames, we make chairs and cabinets and use the leather to make it look good, to make it furniture that is usable and looks nice”; recycling – “it is important to reuse old rubbish we find, and the leather makes it special”; history – “the leather gives it a reference to the history of Fitzroy Crossing and station life. Saddlers used to come and repair saddles using leather, making twisted rope out of cowhide. This is what I think about when we are using the leather”; and sensory – “the smell of that leather is so good. It brings back memories, triggers those old memories of walking around the saddle room in Noonkanbah shed. There is a sensory response, that’s important.” “The collaborative process and experimentation is key to this project. Trent and I work together on this, we both sketch, look at each other’s sketches and from there we mix it up. I’m really enjoying the skills sharing, learning from each other, we both have a lot of different ideas, we keep coming up with new works, keep experimenting.” Unlike their Jangarra Armchair, a previous collaboration designed and made in Fitzroy Crossing, Partu was developed in Thirroul on the New South Wales Coal Coast. Johnny and Trent came together four times over a period of 18 months, developing new methods for collaboration that could shape their incongruent knowledge, methods and skills in designing and making into co-authored outcomes. These methods include: ‘Sketching exchange’, a process of back and forth sketch iteration, allowing an idea to evolve with equal input from both creators; and ‘designing by making’, a method of working with materials at full scale, to design an object as it is being made. In this approach the prototype is the sketch and both collaborators work together to carve, construct and/or manipulate material, giving the object three-dimensional form as they design and make simultaneously. Ngumu Jangka Warnti is the Walmajarri phrase for ‘all made from rubbish’. The design of this collection began with a trip to the local scrap metal yard, in a vague search for anything interesting. Johnny and Trent salvaged a selection of discarded aluminium mesh and used this found metal as the starting point for experimentation. Trent and Johnny designed these pieces as they made them, starting with a mesh substrate cut vaguely in the shape of a chair, and together beat the material with hammers, concrete blocks and tree stumps until it took on a form that they both liked. This beaten geometry was then softened by laminating New Zealand saddle leather to skin the mesh, masking its geometry and softening its idiosyncratic undulations.

    Trent is a frequent collaborator with indigenous creators due to his immense respect for cultural heritage. In this session, Trent speaks about the project he undertook with Nyikina man Johnny Nargoodah ‘Ngumu Janka Warnti (all made from rubbish)’. TRENT JANSEN Trent Jansen is a designer based in Thirroul, Australia, and Lecturer at the University of New South Wales, Art & Design, Sydney Australia. Jansen gained his PhD from the University of Wollongong under renowned Australian art historian Ian McLean, and his Bachelor of Design from the College of Fine Arts, University of New South Wales in Sydney. He spent part of his undergraduate degree in the Department of Art and Design at the University of Alberta in Edmonton, Canada. After a period working under Marcel Wanders in Amsterdam, Jansen returned to Australia to set up a design studio in Sydney, before moving his practice to Thirroul on the New South Wales South Coast. Jansen applies his method of Design Anthropology to the design of limited edition and one-off pieces for clients including the Molonglo Group, Charter Hall and Mirvac. This approach is also applied to the design of products and furniture for manufacturers Moooi, DesignByThem and Tait. Jansen was one of the cofounders of Broached Commissions and is represented by Broached Commissions for Broached in-house commissions. “Trent has a great deal of respect for cultural heritage and is extraordinarily thorough in incorporating cultural identity and history into his works ... his collaboration with Broached Commissions has the same kind of take on defining the Australian design identity as Droog has done for the Dutch design identity” Marcel Wanders – Mezzanine, 2015. In this session, Trent will speak about the project he undertook with Nyikina man Johnny Nargoodah ‘Ngumu Janka Warnti (all made from rubbish)’. trentjansen.com instagram.com/trentjansenstudio Trent Jansen is represented by Gallery All in the USA and China and Galleria Rossana Orlandi in Europe NGUMU JANKA WARNTI (ALL MADE FROM RUBBISH), A COLLABORATIVE PROJECT WITH NYIKINA MAN JOHNNY NARGOODAH Words by Trent Jansen and Johnny Nargoodah Johnny Nargoodah is a Nyikina man who has spent much of his life working with leather as a saddler on remote cattle stations, and Trent Jansen is an avant-garde object designer from Thirroul in New South Wales, who regularly experiments with leather and animal pelts in his collectable design work. Partu (2020), the Walmajarri word for ‘skin’, is their collaborative project experimenting with the combination of these disparate sensibilities. This body of work is designed by Trent and Johnny and both designers have their own lens through which to view the processes and inspirations governing these works: From Trent’s point of view, this project is an experiment in the generation of hybrid material culture. Material Culture Theory says that the artefacts we create embody the values, ideas, attitudes and assumptions (the culture) of the creator. But what if an artefact is created collaboratively by two people from different cultures? Does this artefact exhibit the cultural values of both authors? If so, how do these cultural values manifest? From Johnny’s point of view, the project has a few different aspects to it: Making – “we use rubbish, recycled frames, we make chairs and cabinets and use the leather to make it look good, to make it furniture that is usable and looks nice”; recycling – “it is important to reuse old rubbish we find, and the leather makes it special”; history – “the leather gives it a reference to the history of Fitzroy Crossing and station life. Saddlers used to come and repair saddles using leather, making twisted rope out of cowhide. This is what I think about when we are using the leather”; and sensory – “the smell of that leather is so good. It brings back memories, triggers those old memories of walking around the saddle room in Noonkanbah shed. There is a sensory response, that’s important.” “The collaborative process and experimentation is key to this project. Trent and I work together on this, we both sketch, look at each other’s sketches and from there we mix it up. I’m really enjoying the skills sharing, learning from each other, we both have a lot of different ideas, we keep coming up with new works, keep experimenting.” Unlike their Jangarra Armchair, a previous collaboration designed and made in Fitzroy Crossing, Partu was developed in Thirroul on the New South Wales Coal Coast. Johnny and Trent came together four times over a period of 18 months, developing new methods for collaboration that could shape their incongruent knowledge, methods and skills in designing and making into co-authored outcomes. These methods include: ‘Sketching exchange’, a process of back and forth sketch iteration, allowing an idea to evolve with equal input from both creators; and ‘designing by making’, a method of working with materials at full scale, to design an object as it is being made. In this approach the prototype is the sketch and both collaborators work together to carve, construct and/or manipulate material, giving the object three-dimensional form as they design and make simultaneously. Ngumu Jangka Warnti is the Walmajarri phrase for ‘all made from rubbish’. The design of this collection began with a trip to the local scrap metal yard, in a vague search for anything interesting. Johnny and Trent salvaged a selection of discarded aluminium mesh and used this found metal as the starting point for experimentation. Trent and Johnny designed these pieces as they made them, starting with a mesh substrate cut vaguely in the shape of a chair, and together beat the material with hammers, concrete blocks and tree stumps until it took on a form that they both liked. This beaten geometry was then softened by laminating New Zealand saddle leather to skin the mesh, masking its geometry and softening its idiosyncratic undulations.

    $35.00 + $1.38 fee
  2. RAA In Practice | MiCRO online lead up event | experiencing regional practice with Cameron Anderson and Sarah Aldridge

    RAA In Practice | MiCRO online lead up event | experiencing regional practice with Cameron Anderson and Sarah Aldridge ticket

    As we got closer to the MiCRO event in Mudgee, there were two related online events, expanding further on the rather large subject of all things MiCRO. The first of these unpacked small scale regional practice, concentrating on a hybrid / remote working model. MiCRO's creative director, Cameron Anderson, is a registered architect with over 14 years of professional experience that includes working with award winning architectural firms both in Sydney and Melbourne. Cameron is dedicated to Sustainable Design practices and providing feasible and individual design responses. His practice, Cameron Anderson Architects, is now based in Mudgee in Central Western New South Wales. Fellow regional practitioner Sarah Aldridge of SPACEstudio in Byron Bay, spoke to Cameron about the challenges of regional practice, discussing issues around recruitment, staff culture, staff monitoring and mentoring and software that are faced by many of our members. Other RAA members also shared their experiences and tips in running regional practices.  MiCRO's creative director, Cameron Anderson, is a registered architect with over 14 years of professional experience that includes working with award winning architectural firms both in Sydney and Melbourne. Cameron is dedicated to Sustainable Design practices and providing feasible and individual design responses. His practice, Cameron Anderson Architects, is now based in Mudgee in Central Western New South Wales. Fellow regional practitioner Sarah Aldridge of SPACEstudio in Byron Bay, will speak to Cameron about the challenges of regional practice, discussing issues around recruitment, staff culture, staff monitoring and mentoring and software that are faced by many of our members. Other RAA members will also shared their experiences and tips in running regional practices.

    As we got closer to the MiCRO event in Mudgee, there were two related online events, expanding further on the rather large subject of all things MiCRO. The first of these unpacked small scale regional practice, concentrating on a hybrid / remote working model. MiCRO's creative director, Cameron Anderson, is a registered architect with over 14 years of professional experience that includes working with award winning architectural firms both in Sydney and Melbourne. Cameron is dedicated to Sustainable Design practices and providing feasible and individual design responses. His practice, Cameron Anderson Architects, is now based in Mudgee in Central Western New South Wales. Fellow regional practitioner Sarah Aldridge of SPACEstudio in Byron Bay, spoke to Cameron about the challenges of regional practice, discussing issues around recruitment, staff culture, staff monitoring and mentoring and software that are faced by many of our members. Other RAA members also shared their experiences and tips in running regional practices.  MiCRO's creative director, Cameron Anderson, is a registered architect with over 14 years of professional experience that includes working with award winning architectural firms both in Sydney and Melbourne. Cameron is dedicated to Sustainable Design practices and providing feasible and individual design responses. His practice, Cameron Anderson Architects, is now based in Mudgee in Central Western New South Wales. Fellow regional practitioner Sarah Aldridge of SPACEstudio in Byron Bay, will speak to Cameron about the challenges of regional practice, discussing issues around recruitment, staff culture, staff monitoring and mentoring and software that are faced by many of our members. Other RAA members will also shared their experiences and tips in running regional practices.

    $35.00 + $1.38 fee
  3. RAA In Practice |  MiCRO online lead up event | modular & tiny homes - the successes & challenges | Jackson Dannock of Made by Bare with Brent Dunn of TAKT Studio for Architecture

    RAA In Practice | MiCRO online lead up event | modular & tiny homes - the successes & challenges | Jackson Dannock of Made by Bare with Brent Dunn of TAKT Studio for Architecture ticket

    As we got even closer to the MiCRO event in Mudgee, this is the second of  two related online events, expanding further on the rather large subject of all things MiCRO. This second session unpacks the trials and triumphs of modular building and tiny homes based on the extensive experience of Jackson Dannock of Made by Bare and Brent Dunn of TAKT Studio for Architecture. Jackson Dannock is the co-founder and head of construction at Made by Bare. He has been a Churchill Fellow since 2017, specialising in co-living and prefabrication. He is an experienced builder and was the construction manager at the ANU Kambri redevelopment, where he gained extensive experience with CLT and Glulam, both examples of mass engineered timber materials. He has also acted as construction manager at the Wallinga Park Equestrian Centre in NSW. Brent Dunn (Director of TAKT Studio for Architecture) is a founding member of the RAA, a registered architect since 2005 with qualifications from UQ and UTas. He was also Director of JointModular, a modular design & architecture business that garnered awards for design, affordability and architecture. 

    As we got even closer to the MiCRO event in Mudgee, this is the second of  two related online events, expanding further on the rather large subject of all things MiCRO. This second session unpacks the trials and triumphs of modular building and tiny homes based on the extensive experience of Jackson Dannock of Made by Bare and Brent Dunn of TAKT Studio for Architecture. Jackson Dannock is the co-founder and head of construction at Made by Bare. He has been a Churchill Fellow since 2017, specialising in co-living and prefabrication. He is an experienced builder and was the construction manager at the ANU Kambri redevelopment, where he gained extensive experience with CLT and Glulam, both examples of mass engineered timber materials. He has also acted as construction manager at the Wallinga Park Equestrian Centre in NSW. Brent Dunn (Director of TAKT Studio for Architecture) is a founding member of the RAA, a registered architect since 2005 with qualifications from UQ and UTas. He was also Director of JointModular, a modular design & architecture business that garnered awards for design, affordability and architecture. 

    $35.00 + $1.38 fee
  4. RAA In Detail – Deemed to Satisfy Compliant Level Entry Thresholds - Stormtech

    RAA In Detail – Deemed to Satisfy Compliant Level Entry Thresholds - Stormtech ticket

    THE SESSION As with all aspects of the construction sector, the specification of level entry thresholds in Australia involves compliance with the National Construction Code (NCC). As is also standard, compliance of these products can involve either Performance Solutions (which vary according to the specific job) or the more prescriptive and standardised Deemed-to-Satisfy (DTS) solutions. In the case of level entry thresholds, amongst specifiers, the DTS option is broadly acknowledged as the way to go. For these products, taking the Performance Solution is viewed as not just unnecessary but too expensive. That said, the pathway to DTS compliance is not as clear as it could be. This CPD Live Session is intended to address that lack of clarity. Beginning by outlining the relevant regulations, their purpose, and their origins, our speakers will go on to outline the clearest and simplest pathway to not just DTS compliance but best practice. By the end of this session, you should be able to: Outline the regulations that apply to the installation of Level Entry Thresholds in Australia Explain why, across the industry, DTS Solutions are generally regarded as preferable to Performance Solutions when specifying Level Entry Thresholds Explain the origin of the NCC regulations that address Level Entry Thresholds Outline the best and simplest ways to meet the DTS requirements of the NCC requirements when specifying Level Entry Thresholds TROY CREIGHTON - MANAGING DIRECTOR, STORMTECH Troy is the Managing Director of Stormtech an award-winning, Australian-owned, family business based in the NSW south coast town of Nowra. Started in 1989, Stormtech has been providing inspiring architectural drainage solutions to architects and designers for over 30 years. Used in bathrooms, showers, thresholds, paved areas, driveways, pools and pool surrounds, Stormtech grates and drains are known for sleek design, innovation and practicality.

    THE SESSION As with all aspects of the construction sector, the specification of level entry thresholds in Australia involves compliance with the National Construction Code (NCC). As is also standard, compliance of these products can involve either Performance Solutions (which vary according to the specific job) or the more prescriptive and standardised Deemed-to-Satisfy (DTS) solutions. In the case of level entry thresholds, amongst specifiers, the DTS option is broadly acknowledged as the way to go. For these products, taking the Performance Solution is viewed as not just unnecessary but too expensive. That said, the pathway to DTS compliance is not as clear as it could be. This CPD Live Session is intended to address that lack of clarity. Beginning by outlining the relevant regulations, their purpose, and their origins, our speakers will go on to outline the clearest and simplest pathway to not just DTS compliance but best practice. By the end of this session, you should be able to: Outline the regulations that apply to the installation of Level Entry Thresholds in Australia Explain why, across the industry, DTS Solutions are generally regarded as preferable to Performance Solutions when specifying Level Entry Thresholds Explain the origin of the NCC regulations that address Level Entry Thresholds Outline the best and simplest ways to meet the DTS requirements of the NCC requirements when specifying Level Entry Thresholds TROY CREIGHTON - MANAGING DIRECTOR, STORMTECH Troy is the Managing Director of Stormtech an award-winning, Australian-owned, family business based in the NSW south coast town of Nowra. Started in 1989, Stormtech has been providing inspiring architectural drainage solutions to architects and designers for over 30 years. Used in bathrooms, showers, thresholds, paved areas, driveways, pools and pool surrounds, Stormtech grates and drains are known for sleek design, innovation and practicality.

    $35.00 + $1.38 fee
  5. RAA In Detail – DBP Act Overview and the Importance of Collaboration with Industry Suppliers- AWS

    RAA In Detail – DBP Act Overview and the Importance of Collaboration with Industry Suppliers- AWS ticket

    THE SESSION This session presents an overview of the importance of collaboration between practitioners and industry suppliers, in this case aluminium windows, door and facades. Learning Outcomes: Describe the DBP Act and the changes implemented after the introduction of the new regulations Explain the importance of windspeed design and the correct use of the AS4055 & AS1170 Discuss the roles of building consultants specialising in performance solutions and window/door suppliers during the design process Explore strategies to optimise facade selection during the specification process Learn how to review window systems test certificates to improve collaboration with facade engineers KARL MORBY, ARCHITECTURAL SPECIFICATION CONSULTANT QLD/NT, AWS Karl has worked within the building industry for well over 40 years on both residential and commercial dwellings from new to old. Starting his career as a carpenter before entering thealuminium windows and doors industry 15 years ago. As a specification representative for AWS, Karl educates and continually develops architects’ and fabricators’ understanding of the best solution tosuit their project requirements and bring their vision to life. Every day Karl is presented with a unique challenge, which is one of the things he enjoys most about his job. Karl is also passionate aboutsustainable practices and ensures he’s kept up to date on what’s new in building materials.Architectural Window Systems (AWS) is one of Australia’s leading suppliers of aluminium window and door systems. Their brands include Vantage® Windows and Doors; ElevateTM Aluminium Systems and ThermalHEARTTM. AWS products are selected for their reliable performance, energy efficiency, customisation and ability to solve a wide range of design challenges. From custom homes to high end luxury homes through to commercial offices and institutional projects such as aged care and education, AWS can help you. Designed, made and tested to meet and exceed Australian Standards. Supplied by over 200 independent fabricators nationwide.

    THE SESSION This session presents an overview of the importance of collaboration between practitioners and industry suppliers, in this case aluminium windows, door and facades. Learning Outcomes: Describe the DBP Act and the changes implemented after the introduction of the new regulations Explain the importance of windspeed design and the correct use of the AS4055 & AS1170 Discuss the roles of building consultants specialising in performance solutions and window/door suppliers during the design process Explore strategies to optimise facade selection during the specification process Learn how to review window systems test certificates to improve collaboration with facade engineers KARL MORBY, ARCHITECTURAL SPECIFICATION CONSULTANT QLD/NT, AWS Karl has worked within the building industry for well over 40 years on both residential and commercial dwellings from new to old. Starting his career as a carpenter before entering thealuminium windows and doors industry 15 years ago. As a specification representative for AWS, Karl educates and continually develops architects’ and fabricators’ understanding of the best solution tosuit their project requirements and bring their vision to life. Every day Karl is presented with a unique challenge, which is one of the things he enjoys most about his job. Karl is also passionate aboutsustainable practices and ensures he’s kept up to date on what’s new in building materials.Architectural Window Systems (AWS) is one of Australia’s leading suppliers of aluminium window and door systems. Their brands include Vantage® Windows and Doors; ElevateTM Aluminium Systems and ThermalHEARTTM. AWS products are selected for their reliable performance, energy efficiency, customisation and ability to solve a wide range of design challenges. From custom homes to high end luxury homes through to commercial offices and institutional projects such as aged care and education, AWS can help you. Designed, made and tested to meet and exceed Australian Standards. Supplied by over 200 independent fabricators nationwide.

    $35.00 + $1.38 fee
  6. RAA In Practice - Wandering with Intent - Bobbie Bayley & Owen Kelly

    RAA In Practice - Wandering with Intent - Bobbie Bayley & Owen Kelly ticket

    Bobbie & Owen’s story begins with two pushbikes, Australia's latitude 25 and student naivety as they set out to find Australia’s architecture in 2017. That was the start of Dogspike aka. The Grand Section as they filled gaps in their knowledge through full immersion. Holes in knowledge have been launching pads for inquiry, each question below is one of these starting points... and it is just starting to get real spicy after having moved to Mparntwe, central Australia in 2023. Things are heating up... ● How can we contribute to Australia’s built environment if we don’t know Australia? - The Grand Section ● How can we create good buildings if we don’t know the place they will belong to? - Process for site analysis ● How can we boast of Australian Vernacular Design if we don’t have a catalogue of it? - Study of Australia’s inland vernacular. ● How can we be good architects if we don’t know how to build? - Hands on construction, Can’t Break Your Hip House ● How can ‘Architecture’ do more? - Working with Healthabitat ● The broad reality of Aboriginal housing is that it is poor functioning. How can we have the biggest impact on people's living environment in the face of climate change? - Data backed passive upgrades, Cool Living OWEN KELLY BARCH | MARCH | ARCHITECT AR#1234 Owen Kelly grew up in the Blue Mountains, NSW. Throughout his career he has initiated exhibitions, public design talks and events (on rooftops) and was instrumental in starting the Healthabitat Nepal Sanitation Studio at the University of Newcastle. Owen has worked on a range of residential, commercial, public and interior projects in his own business, with The Shed Collective and Incidental Architecture (Sydney) as well as being a sessional academic at The University of Sydney and the University of Newcastle. Now in Mparntwe alongside Dogspike Design he works with Susan Dugdale and Associates and continues remote work as an accredited team leader with Healthabitat. Owen is a registered architect in the Northern Territory. BOBBIE BAYLEY BARCH | MARCH | DIP ID | CIV SOCIAL HOUSING | ACCREDITED BUILDING DESIGNER #6773 Bobbie Bayley grew up in the Hunter Valley, NSW. Bobbie finished her undergraduate studies in South Carolina, USA, and undertook an internship in Dallas, Texas, in 2015, followed by cultural studies in South America. She has been instrumental in community work with various groups including (out)fit and Healthabitat, and institutions such as Ozetecture. She was awarded the prestigious Byera Hadley scholarship in 2017 to undertake The Grand Section, Stuttgart IBA International Summer School scholarship in 2019, and the 2020 MADE scholarship from The Sydney Opera House to carry out a 6-week multidisciplinary project in Denmark. Alongside Dogspike Design, Bobbie works as a Project Manager for Healthabitat and is carrying out research on improving the Thermal Performance of NT Aboriginal Community Housing in the face of climate change – Cool Living. Cool Living was awarded the Construction & Practice Prize in the 2023 NSW Student Architecture Awards. Bobbie is a nationally accredited Building Designer. Bobbie and Owen have been awarded nationally by the Australian Institute of Architects.

    Bobbie & Owen’s story begins with two pushbikes, Australia's latitude 25 and student naivety as they set out to find Australia’s architecture in 2017. That was the start of Dogspike aka. The Grand Section as they filled gaps in their knowledge through full immersion. Holes in knowledge have been launching pads for inquiry, each question below is one of these starting points... and it is just starting to get real spicy after having moved to Mparntwe, central Australia in 2023. Things are heating up... ● How can we contribute to Australia’s built environment if we don’t know Australia? - The Grand Section ● How can we create good buildings if we don’t know the place they will belong to? - Process for site analysis ● How can we boast of Australian Vernacular Design if we don’t have a catalogue of it? - Study of Australia’s inland vernacular. ● How can we be good architects if we don’t know how to build? - Hands on construction, Can’t Break Your Hip House ● How can ‘Architecture’ do more? - Working with Healthabitat ● The broad reality of Aboriginal housing is that it is poor functioning. How can we have the biggest impact on people's living environment in the face of climate change? - Data backed passive upgrades, Cool Living OWEN KELLY BARCH | MARCH | ARCHITECT AR#1234 Owen Kelly grew up in the Blue Mountains, NSW. Throughout his career he has initiated exhibitions, public design talks and events (on rooftops) and was instrumental in starting the Healthabitat Nepal Sanitation Studio at the University of Newcastle. Owen has worked on a range of residential, commercial, public and interior projects in his own business, with The Shed Collective and Incidental Architecture (Sydney) as well as being a sessional academic at The University of Sydney and the University of Newcastle. Now in Mparntwe alongside Dogspike Design he works with Susan Dugdale and Associates and continues remote work as an accredited team leader with Healthabitat. Owen is a registered architect in the Northern Territory. BOBBIE BAYLEY BARCH | MARCH | DIP ID | CIV SOCIAL HOUSING | ACCREDITED BUILDING DESIGNER #6773 Bobbie Bayley grew up in the Hunter Valley, NSW. Bobbie finished her undergraduate studies in South Carolina, USA, and undertook an internship in Dallas, Texas, in 2015, followed by cultural studies in South America. She has been instrumental in community work with various groups including (out)fit and Healthabitat, and institutions such as Ozetecture. She was awarded the prestigious Byera Hadley scholarship in 2017 to undertake The Grand Section, Stuttgart IBA International Summer School scholarship in 2019, and the 2020 MADE scholarship from The Sydney Opera House to carry out a 6-week multidisciplinary project in Denmark. Alongside Dogspike Design, Bobbie works as a Project Manager for Healthabitat and is carrying out research on improving the Thermal Performance of NT Aboriginal Community Housing in the face of climate change – Cool Living. Cool Living was awarded the Construction & Practice Prize in the 2023 NSW Student Architecture Awards. Bobbie is a nationally accredited Building Designer. Bobbie and Owen have been awarded nationally by the Australian Institute of Architects.

    $35.00 + $1.38 fee
  7. RAA In Practice - Image Making with AI - Tom Blachford

    RAA In Practice - Image Making with AI - Tom Blachford ticket

    Photographic image maker Tom Blachford shares his journey into text-to-image ai from the beginning and present some of his own series created with the technology. Tom will also share an up to the minute tutorial on image making using Mid Journey as well as prompt generation using chat GPT and methods for upsizing images. Tom will be available for questions and is happy to tackle any topic regarding ai and image generation. Tom has spent the past decade exploring architecture both in fine art and commercial disciplines but has recently ventured into the world of AI. His work explores his varied interests in architecture, design and pop culture with a trademark subversive edge.

    Photographic image maker Tom Blachford shares his journey into text-to-image ai from the beginning and present some of his own series created with the technology. Tom will also share an up to the minute tutorial on image making using Mid Journey as well as prompt generation using chat GPT and methods for upsizing images. Tom will be available for questions and is happy to tackle any topic regarding ai and image generation. Tom has spent the past decade exploring architecture both in fine art and commercial disciplines but has recently ventured into the world of AI. His work explores his varied interests in architecture, design and pop culture with a trademark subversive edge.

    $35.00 + $1.38 fee
  8. RAA In Practice | Architectural Marketing; a Trial and Error Approach - Mick Moloney of Moloney Architects

    RAA In Practice | Architectural Marketing; a Trial and Error Approach - Mick Moloney of Moloney Architects ticket

    Drawing on his own experiences, Mick Moloney of Ballarat based practice Moloney Architects delves into his adventures in architectural marketing, revealing both victories and failures. Mick and Jules Moloney co-founded Moloney Architects in Ballarat in 2007. The practice has 7 staff (including Mick and Jules) and work mainly on single residential projects. Mick is an AIA Victorian Chapter Council member and currently sits on the AIA Vic Heritage Committee. He is also the chair of the AIA Vic Regional Committee where he is part of a working group that will establish a regional architecture awards program in Victoria that will reflect the existing regional award programs in NSW and QLD. Mick is currently recording the fourth season of the architectural business podcast 'In Detail', a show that aims to lift the lid on the hidden aspects of architectural practice.

    Drawing on his own experiences, Mick Moloney of Ballarat based practice Moloney Architects delves into his adventures in architectural marketing, revealing both victories and failures. Mick and Jules Moloney co-founded Moloney Architects in Ballarat in 2007. The practice has 7 staff (including Mick and Jules) and work mainly on single residential projects. Mick is an AIA Victorian Chapter Council member and currently sits on the AIA Vic Heritage Committee. He is also the chair of the AIA Vic Regional Committee where he is part of a working group that will establish a regional architecture awards program in Victoria that will reflect the existing regional award programs in NSW and QLD. Mick is currently recording the fourth season of the architectural business podcast 'In Detail', a show that aims to lift the lid on the hidden aspects of architectural practice.

    $35.00 + $1.38 fee
  9. RAA In Practice | Beaumaris Modern with Fiona Austin & Wilko Doehring

    RAA In Practice | Beaumaris Modern with Fiona Austin & Wilko Doehring ticket

    Beaumaris is a bayside suburb of Melbourne about 20km from the city centre known for its mid century architecture. Beaumaris Modern is a not for profit community group that was started in 2017 with the aim of celebrating, educating about and promoting the area’s mid-century architecture. Beaumaris Modern founder and interior designer Fiona Austin and committee member and architect Wilko Doehring will outline the history of Beaumaris and why the suburb was ripe for post war development. They will show examples of architects that worked in Beaumaris – many now household names and talk about Beaumaris being a ‘hotbed’ for creatives with an extraordinary number of well known designers, architects and artists growing up or moving to Beaumaris. They will present some of the architectural gems that have been demolished and the advocacy work the group undertakes with community and council. They will also discuss the events that Beaumaris Modern puts on in the community and the two popular coffee table books they have produced. Their presentation is aimed to kick off a discussion and provide an understanding of the suburb and why it’s special. FIONA AUSTIN Fiona launched the Beaumaris Modern Instagram and Facebook page over twelve years ago after researching and documenting Beaumaris MCM houses. That research culminated in two books: Beaumaris Modern 1&2. Fiona was founding President of Beaumaris Modern which was established seven years ago as a not-for-profit community group, Fiona, and her husband Craig, have enjoyed raising their two sons in Beaumaris as well as restoring and renovating two Beaumaris MCM houses. After her thirty five-year interior design career, Fiona has now retired to continue with her painting practice in addition to contributing to Beaumaris Modern as a committee member. WILKO DOEHRING Melbourne architect Wilko Doehring has always held a long appreciation for modernist architecture. Born in Germany, his admiration for the Bauhaus movement translated to a love for Australia’s adaptation of mid-century architecture.As a Beaumaris Modern committee member, Wilko assists with advice on renovation and restoration options for mid-century homeowners and offers his over 25 years’ experience in Heritage Architecture in Australia and overseas. With a common-sense approach to heritage architecture, Wilko’s aim is to preserve design excellence and neighbourhood character while providing adequate options for owners to renovate to meet the demand of the 21st century.

    Beaumaris is a bayside suburb of Melbourne about 20km from the city centre known for its mid century architecture. Beaumaris Modern is a not for profit community group that was started in 2017 with the aim of celebrating, educating about and promoting the area’s mid-century architecture. Beaumaris Modern founder and interior designer Fiona Austin and committee member and architect Wilko Doehring will outline the history of Beaumaris and why the suburb was ripe for post war development. They will show examples of architects that worked in Beaumaris – many now household names and talk about Beaumaris being a ‘hotbed’ for creatives with an extraordinary number of well known designers, architects and artists growing up or moving to Beaumaris. They will present some of the architectural gems that have been demolished and the advocacy work the group undertakes with community and council. They will also discuss the events that Beaumaris Modern puts on in the community and the two popular coffee table books they have produced. Their presentation is aimed to kick off a discussion and provide an understanding of the suburb and why it’s special. FIONA AUSTIN Fiona launched the Beaumaris Modern Instagram and Facebook page over twelve years ago after researching and documenting Beaumaris MCM houses. That research culminated in two books: Beaumaris Modern 1&2. Fiona was founding President of Beaumaris Modern which was established seven years ago as a not-for-profit community group, Fiona, and her husband Craig, have enjoyed raising their two sons in Beaumaris as well as restoring and renovating two Beaumaris MCM houses. After her thirty five-year interior design career, Fiona has now retired to continue with her painting practice in addition to contributing to Beaumaris Modern as a committee member. WILKO DOEHRING Melbourne architect Wilko Doehring has always held a long appreciation for modernist architecture. Born in Germany, his admiration for the Bauhaus movement translated to a love for Australia’s adaptation of mid-century architecture.As a Beaumaris Modern committee member, Wilko assists with advice on renovation and restoration options for mid-century homeowners and offers his over 25 years’ experience in Heritage Architecture in Australia and overseas. With a common-sense approach to heritage architecture, Wilko’s aim is to preserve design excellence and neighbourhood character while providing adequate options for owners to renovate to meet the demand of the 21st century.

    $35.00 + $1.38 fee
  10. RAA In Practice | Adobe Creative Suite - Shortcuts and Specifics for Small Practice Presentation with Marcus Piper

    RAA In Practice | Adobe Creative Suite - Shortcuts and Specifics for Small Practice Presentation with Marcus Piper ticket

    THE SESSION In this demonstrative presentation Marcus Piper shared his screen and wealth of experience using Adobe Creative Suite to provide small practices and in-house design teams with a broad, but in-depth understanding of producing print and screen ready promotional documents efficiently and to industry standard. This session focussed predominantly on Adobe InDesign but also cover font management and selection, Adobe Photoshop and Illustrator and preparing files for print. MARCUS PIPER Digital Craftsperson, Marcus Piper, has spent the last 25-years designing books, magazines, identities and collateral for clients across the Globe with a focus on the architecture, design and cultural sectors. POL Oxygen, Habitus, Indesign, inside (interior review), Mezzanine, Australian Aboriginal Art magazine, the British Crafts Council magazine and Swarovski’s Crystallized are a select few of the titles he has crafted along with books for Spanish designer Jaime Hayon, Neil Perry’s Rock Pool Bar & Grill and the monumental Sun & Shadow Spinifex Arts Project title of 2023. In that time Piper has worked with iconic British designer Neville Brody, Frost Design, Clemenger BBDO, The Conran Shop, Grimshaw and Conde Nast along with a range of independent architecture and design firms in helping build their visual and verbal identities. He is part of Berlin-based type foundry NaN.xyz and balances design with an art practice where his work has been collected by the National Gallery of Victoria and JAHM. Piper is based between Sydney and the far South Coast of NSW and is a Founding Committee Member of the Regional Architecture Association.

    THE SESSION In this demonstrative presentation Marcus Piper shared his screen and wealth of experience using Adobe Creative Suite to provide small practices and in-house design teams with a broad, but in-depth understanding of producing print and screen ready promotional documents efficiently and to industry standard. This session focussed predominantly on Adobe InDesign but also cover font management and selection, Adobe Photoshop and Illustrator and preparing files for print. MARCUS PIPER Digital Craftsperson, Marcus Piper, has spent the last 25-years designing books, magazines, identities and collateral for clients across the Globe with a focus on the architecture, design and cultural sectors. POL Oxygen, Habitus, Indesign, inside (interior review), Mezzanine, Australian Aboriginal Art magazine, the British Crafts Council magazine and Swarovski’s Crystallized are a select few of the titles he has crafted along with books for Spanish designer Jaime Hayon, Neil Perry’s Rock Pool Bar & Grill and the monumental Sun & Shadow Spinifex Arts Project title of 2023. In that time Piper has worked with iconic British designer Neville Brody, Frost Design, Clemenger BBDO, The Conran Shop, Grimshaw and Conde Nast along with a range of independent architecture and design firms in helping build their visual and verbal identities. He is part of Berlin-based type foundry NaN.xyz and balances design with an art practice where his work has been collected by the National Gallery of Victoria and JAHM. Piper is based between Sydney and the far South Coast of NSW and is a Founding Committee Member of the Regional Architecture Association.

    $35.00 + $1.38 fee
  11. RAA In Detail | Context-Specific Design & Manufacture: an Embedded Approach to Sustainable Furniture | Tait

    RAA In Detail | Context-Specific Design & Manufacture: an Embedded Approach to Sustainable Furniture | Tait ticket

    THE SESSION To embody integrity and value, a product – much like a piece of architecture – must consider its place. For Tait, designing and manufacturing in Australia, specifically for Australian environments, has been the heart of the business for over 30 years. Join Gordon Tait, leading Industrial Designer Adam Goodrum and Marcus Piper in conversation to hear how Tait cultivates A Life Outside with longevity, by embedding their outdoor furniture with fit-for-purpose design and manufacturing. ADAM GOODRUM As one of Australia’s leading industrial designers, Adam Goodrum is world renowned for his design innovation and distinct Australian aesthetic. Focusing on furniture, product, and interior design, Goodrum delivers progressively original, intelligent and award-winning collections, highly regarded for residential, commercial and retail applications. Goodrum’s work has been awarded various design accolades, including the NGV Rigg Prize, Vogue x Alessi Design Prize, Bombay Sapphire Design Discovery Award, Indesign Luminary Award and the Idea Awards Editor’s Medal. His work has also been included in exhibitions and collections at Powerhouse / MAAS, Art Gallery WA, NGV, NGA, London Design Museum and the Gent Design Museum, Belgium. Goodrum has also recently been inducted into the Design Institute of Australia’s Hall of Fame and was awarded a Gold Medal at the 2024 Interior Design Excellence Awards. Working with Tait, Goodrum has designed the iconic Volley collection, Trace collection and Element fire pit. More recently in collaboration with Tait, Goodrum has designed the newly released Billy, Voom, Scape and Xylem collections as well as the Swing Dining Chair and Pogo Table range. GORDON TAIT As one-half of the creative couple at the helm of Australian outdoor furniture brand Tait, Gordon Tait leads the Tait Design Studio. Designed and handcrafted in Australia from sustainable materials, Tait products are reflective of our enviable outdoor lifestyle, built to withstand diverse climate conditions and informed by a distinctly Australian palette. Established in 1992 by Gordon and Susan Tait, Tait pieces have proudly become icons of contemporary Australian design, renowned for their durability and longevity. The Tait design ethos is deeply rooted in their manufacturing heritage, placing paramount importance on quality, craftsmanship and sustainability in every creation.

    THE SESSION To embody integrity and value, a product – much like a piece of architecture – must consider its place. For Tait, designing and manufacturing in Australia, specifically for Australian environments, has been the heart of the business for over 30 years. Join Gordon Tait, leading Industrial Designer Adam Goodrum and Marcus Piper in conversation to hear how Tait cultivates A Life Outside with longevity, by embedding their outdoor furniture with fit-for-purpose design and manufacturing. ADAM GOODRUM As one of Australia’s leading industrial designers, Adam Goodrum is world renowned for his design innovation and distinct Australian aesthetic. Focusing on furniture, product, and interior design, Goodrum delivers progressively original, intelligent and award-winning collections, highly regarded for residential, commercial and retail applications. Goodrum’s work has been awarded various design accolades, including the NGV Rigg Prize, Vogue x Alessi Design Prize, Bombay Sapphire Design Discovery Award, Indesign Luminary Award and the Idea Awards Editor’s Medal. His work has also been included in exhibitions and collections at Powerhouse / MAAS, Art Gallery WA, NGV, NGA, London Design Museum and the Gent Design Museum, Belgium. Goodrum has also recently been inducted into the Design Institute of Australia’s Hall of Fame and was awarded a Gold Medal at the 2024 Interior Design Excellence Awards. Working with Tait, Goodrum has designed the iconic Volley collection, Trace collection and Element fire pit. More recently in collaboration with Tait, Goodrum has designed the newly released Billy, Voom, Scape and Xylem collections as well as the Swing Dining Chair and Pogo Table range. GORDON TAIT As one-half of the creative couple at the helm of Australian outdoor furniture brand Tait, Gordon Tait leads the Tait Design Studio. Designed and handcrafted in Australia from sustainable materials, Tait products are reflective of our enviable outdoor lifestyle, built to withstand diverse climate conditions and informed by a distinctly Australian palette. Established in 1992 by Gordon and Susan Tait, Tait pieces have proudly become icons of contemporary Australian design, renowned for their durability and longevity. The Tait design ethos is deeply rooted in their manufacturing heritage, placing paramount importance on quality, craftsmanship and sustainability in every creation.

    $35.00 + $1.38 fee
  12. RAA In Practice | Building with Rammed Earth - Justin Penney

    RAA In Practice | Building with Rammed Earth - Justin Penney ticket

    THE SESSION Mudgee based builder Justin Penney will discuss what rammed earth is, his history using it and cover some practical considerations and limitations to those looking at specifying it. JUSTIN PENNEY Justin Penney is a licensed builder and director of Penney Constructions. Justin founded Penney Constructions in 2004 and has had a keen interest in sustainable building, working with a small, detail focussed team. He has spent the last 15 years specialising in rammed earth construction and enjoys collaborating with architects to bring buildings to life. Those who attended our Mudgee event earlier in the year will remember Justin’s generous contribution to a panel discussion as well as his tour of Strikes 3, his prefabricated house collaboration with Glenn Murcutt.

    THE SESSION Mudgee based builder Justin Penney will discuss what rammed earth is, his history using it and cover some practical considerations and limitations to those looking at specifying it. JUSTIN PENNEY Justin Penney is a licensed builder and director of Penney Constructions. Justin founded Penney Constructions in 2004 and has had a keen interest in sustainable building, working with a small, detail focussed team. He has spent the last 15 years specialising in rammed earth construction and enjoys collaborating with architects to bring buildings to life. Those who attended our Mudgee event earlier in the year will remember Justin’s generous contribution to a panel discussion as well as his tour of Strikes 3, his prefabricated house collaboration with Glenn Murcutt.

    $35.00 + $1.38 fee
  13. RAA In Detail | Metals in the Raw and in the Wild - Considering Metal in Architectural Interiors | Savage Design

    RAA In Detail | Metals in the Raw and in the Wild - Considering Metal in Architectural Interiors | Savage Design ticket

    THE SESSION Savage Design draws on a century-long relationship with metal; from smithing, to a quarter of a century of precision contract manufacture, to custom milling and to one-off prototyping, to inform its own approach to product design. This CPD was an exploration of brass and stainless in particular; the materials and the technology of production, as well as the pros and cons of various coatings, treatments and maintenance regimes CPD OUTLINE RAW MATERIAL: Make up, Grades, Raw material types and properties. MANUFACTURE: Fabrication, machining and casting FINISH: Raw, coatings, care and maintenance. LIFE CYCLE: Production, and material re-use and recycling; both in the context of existing site materials & how to promote sustainability at the design stage. SAVAGE DESIGN At Savage Design we seek Engineered Beauty – the balance of honest design, master craftsmanship, and sound knowledge of materials. We have been doing this for over a century from our factory and offices in Sydney Australia. The outcome of Engineered Beauty is translated into real world objects: furniture, lighting, hardware, and homewares made of premium metals suitable for curated spaces and the lives of the design conscious. JAMES GROOM James Groom is an industrial designer and creative director of Savage Design. Alongside director and fellow designer Joel Savage, James designs furniture, lighting, architectural hardware and objects that make up the Savage Design collection. James spent his childhood sketching race cars fuelling a lifelong interest in Formula One where design, technology and sport all come together. Beyond sketching cars, James spent much time discussing the importance of balance with his architect father, forming his belief that proportion and functionality are key to design and its success. Later life, this interest in design, technology and speed has manifested in cycling becoming the top extra-curricular outlet. James graduated with honours in industrial design from the University of Western Sydney. Working in the building industry during his studies and then in the exhibition industry after graduating, James gained valuable insights into how things are put together as well as a thorough understanding of design, going from a concept, through prototyping, being manufactured, and installed or used

    THE SESSION Savage Design draws on a century-long relationship with metal; from smithing, to a quarter of a century of precision contract manufacture, to custom milling and to one-off prototyping, to inform its own approach to product design. This CPD was an exploration of brass and stainless in particular; the materials and the technology of production, as well as the pros and cons of various coatings, treatments and maintenance regimes CPD OUTLINE RAW MATERIAL: Make up, Grades, Raw material types and properties. MANUFACTURE: Fabrication, machining and casting FINISH: Raw, coatings, care and maintenance. LIFE CYCLE: Production, and material re-use and recycling; both in the context of existing site materials & how to promote sustainability at the design stage. SAVAGE DESIGN At Savage Design we seek Engineered Beauty – the balance of honest design, master craftsmanship, and sound knowledge of materials. We have been doing this for over a century from our factory and offices in Sydney Australia. The outcome of Engineered Beauty is translated into real world objects: furniture, lighting, hardware, and homewares made of premium metals suitable for curated spaces and the lives of the design conscious. JAMES GROOM James Groom is an industrial designer and creative director of Savage Design. Alongside director and fellow designer Joel Savage, James designs furniture, lighting, architectural hardware and objects that make up the Savage Design collection. James spent his childhood sketching race cars fuelling a lifelong interest in Formula One where design, technology and sport all come together. Beyond sketching cars, James spent much time discussing the importance of balance with his architect father, forming his belief that proportion and functionality are key to design and its success. Later life, this interest in design, technology and speed has manifested in cycling becoming the top extra-curricular outlet. James graduated with honours in industrial design from the University of Western Sydney. Working in the building industry during his studies and then in the exhibition industry after graduating, James gained valuable insights into how things are put together as well as a thorough understanding of design, going from a concept, through prototyping, being manufactured, and installed or used

    $35.00 + $1.38 fee
  14. RAA In Practice | Facilitating Sustainable Pro-Bono Work - Building Communities, Building Futures | Mike Sneyd

    RAA In Practice | Facilitating Sustainable Pro-Bono Work - Building Communities, Building Futures | Mike Sneyd ticket

    MIKE SNEYD OF EKD ARCHITECTS At EKD Architects, we believe architecture is more than just buildings - it's about empowering communities and creating lasting impact. Join us for an insightful session where Mike will dive into how architects can play a pivotal role in community-led projects across rural Australia, while also addressing key challenges like obtaining funding, recovering costs and avoiding white elephants. What You’ll Learn: The Win-Win of Pro-Bono Work: Discover how pro-bono projects not only transform communities but also enhance architectural practices by fostering a sense of community, innovation, and a deeper sense of purpose. Addressing need: Learn how Architects can be the change drivers in communities through applying local knowledge and sustainable design principles, ensuring that community projects are not just cost-effective but also socially responsible. Navigating Cost Recovery: Pro-bono doesn’t mean operating at a complete loss. Mike will share practical strategies to recover costs, secure funding, and ensure long-term project viability - benefiting both the practice and the community. If you have a passion project or a community initiative you’ve been dreaming of bringing to life, this session is for you! Find out how we as architects can facilitate, guide, and co-create meaningful change.

    MIKE SNEYD OF EKD ARCHITECTS At EKD Architects, we believe architecture is more than just buildings - it's about empowering communities and creating lasting impact. Join us for an insightful session where Mike will dive into how architects can play a pivotal role in community-led projects across rural Australia, while also addressing key challenges like obtaining funding, recovering costs and avoiding white elephants. What You’ll Learn: The Win-Win of Pro-Bono Work: Discover how pro-bono projects not only transform communities but also enhance architectural practices by fostering a sense of community, innovation, and a deeper sense of purpose. Addressing need: Learn how Architects can be the change drivers in communities through applying local knowledge and sustainable design principles, ensuring that community projects are not just cost-effective but also socially responsible. Navigating Cost Recovery: Pro-bono doesn’t mean operating at a complete loss. Mike will share practical strategies to recover costs, secure funding, and ensure long-term project viability - benefiting both the practice and the community. If you have a passion project or a community initiative you’ve been dreaming of bringing to life, this session is for you! Find out how we as architects can facilitate, guide, and co-create meaningful change.

    $35.00 + $1.38 fee
  15. RAA In Practice | ACA and the Time Cost Calculator Guide | Paul Viney

    RAA In Practice | ACA and the Time Cost Calculator Guide | Paul Viney ticket

    WHAT YOU'LL LEARN Participation in this event will give the attendees a better understanding of the range of factors to consider in forming fee proposals, tools and information to aid client fee negotiations and benchmarking practice overheads. TIME COST CALCULATOR GUIDE Do you know what your break even point is? How do you determine your billable and non-billable hours? What is the cost of your overheads/profit? Do you know your level of risk on your projects and the value you add through innovation? If you want to know more about these questions, the Association of Consulting Architects (ACA) Time Cost Calculator Guide (TCCG) is a tool to help practices assess the time and costs involved in providing an appropriate level of service for a broad range of building types. The Calculator provides a fundamental knowledge base for practices when developing fee proposals and when entering fee negotiations. It can be used by practices of all sizes for a wide range of building types, accommodates a range of service levels and procurement types and places a value on risk and innovation. Paul Viney, the developer of the ACA Time Cost Calculator Guide, will walk us through how to use the tool and explain how it can provide evidence to support sustainable fee levels for your practice, with the additional benefit of benchmarking practice overheads for similar sized firms. A great opportunity to discover the functionality, ask questions on how exactly to use the tool and be involved in a discussion on the many elements to consider when evaluating projects and setting your own fees. THE ASSOCIATION OF CONSULTING ARCHITECTS The ACA was founded in 1987 as the national peak body representing the interests of employers in industrial matters, including workplace conditions and Award negotiations. In addition, the association has a responsibility to positively influence and support practice management and the business of architecture and to engage in the wider industry. The ACA aims to work collaboratively with other architecture bodies in representing and supporting the profession and is proud to work together with the RAA. Please note that access to the ACA Time Cost Calculator Guide Tool is only available to ACA Members as a member benefit. We acknowledge and celebrate that many regionally based ACA members hold dual membership with the RAA. PAUL VINEY Paul Viney is the President of the Victoria/Tasmania Branch and National Vice-President of the Association of Consulting Architects (ACA). Through ACA-VIC/TAS, Paul has led the development of a range of tools for the use of ACA members nationwide, such as the Time Cost Calculator and Salary Calculator to assist members in running effective, efficient and profitable practices. As President of the ACA-VIC/TAS branch, Paul is committed to facilitating stronger relationships with government and other key organisations in the construction industry; and working collaboratively with all architectural organisations with the aim of speaking with one voice on key issues for the betterment of consumer outcomes and to achieve the best outcomes for the profession and the industry as a whole. Paul is Director of FPPV Architecture, Melbourne and Director of JAI Architecture, Thailand.

    WHAT YOU'LL LEARN Participation in this event will give the attendees a better understanding of the range of factors to consider in forming fee proposals, tools and information to aid client fee negotiations and benchmarking practice overheads. TIME COST CALCULATOR GUIDE Do you know what your break even point is? How do you determine your billable and non-billable hours? What is the cost of your overheads/profit? Do you know your level of risk on your projects and the value you add through innovation? If you want to know more about these questions, the Association of Consulting Architects (ACA) Time Cost Calculator Guide (TCCG) is a tool to help practices assess the time and costs involved in providing an appropriate level of service for a broad range of building types. The Calculator provides a fundamental knowledge base for practices when developing fee proposals and when entering fee negotiations. It can be used by practices of all sizes for a wide range of building types, accommodates a range of service levels and procurement types and places a value on risk and innovation. Paul Viney, the developer of the ACA Time Cost Calculator Guide, will walk us through how to use the tool and explain how it can provide evidence to support sustainable fee levels for your practice, with the additional benefit of benchmarking practice overheads for similar sized firms. A great opportunity to discover the functionality, ask questions on how exactly to use the tool and be involved in a discussion on the many elements to consider when evaluating projects and setting your own fees. THE ASSOCIATION OF CONSULTING ARCHITECTS The ACA was founded in 1987 as the national peak body representing the interests of employers in industrial matters, including workplace conditions and Award negotiations. In addition, the association has a responsibility to positively influence and support practice management and the business of architecture and to engage in the wider industry. The ACA aims to work collaboratively with other architecture bodies in representing and supporting the profession and is proud to work together with the RAA. Please note that access to the ACA Time Cost Calculator Guide Tool is only available to ACA Members as a member benefit. We acknowledge and celebrate that many regionally based ACA members hold dual membership with the RAA. PAUL VINEY Paul Viney is the President of the Victoria/Tasmania Branch and National Vice-President of the Association of Consulting Architects (ACA). Through ACA-VIC/TAS, Paul has led the development of a range of tools for the use of ACA members nationwide, such as the Time Cost Calculator and Salary Calculator to assist members in running effective, efficient and profitable practices. As President of the ACA-VIC/TAS branch, Paul is committed to facilitating stronger relationships with government and other key organisations in the construction industry; and working collaboratively with all architectural organisations with the aim of speaking with one voice on key issues for the betterment of consumer outcomes and to achieve the best outcomes for the profession and the industry as a whole. Paul is Director of FPPV Architecture, Melbourne and Director of JAI Architecture, Thailand.

    $35.00 + $1.38 fee
  16. RAA In Practice | Designing with Country: A Case Study of the Budj Bim Cultural Landscape | Bianca Scaife

    RAA In Practice | Designing with Country: A Case Study of the Budj Bim Cultural Landscape | Bianca Scaife ticket

    THE SESSION Bianca Scaife will present CSA’s Budj Bim Cultural Landscape project as an example of ‘best practice’ in designing with Country. The Budj Bim Cultural Landscape, in southwest Victoria, has been recognised by UNESCO as a World Heritage Site with outstanding universal value. CSA have designed a range of tourism infrastructure on these sites for the Traditional Owners of this Country, the Gunditjmara. The development provides an environmentally, socially and economically sustainable means of caring for Country and ensures the continuation of Gunditjmara culture for future generations. Bianca will explain the approach that CSA took to working with the Gunditjmara community and how their cultural knowledge and understanding of Country informed the design. She will also reflect on how this experience has influenced her approach to design more broadly and provide practical advice for those who are looking to expand their knowledge of what ‘designing with Country’ means. BIANCA SCAIFE Bianca is a director of CSA, a small practice she co-founded in 2003. She lives and works on Gunditjmara Country in southwest Victoria and is committed to making an authentic contribution to the natural, cultural and built environment of this region. Bianca’s learning about the Gunditjmara, their culture and connection to Country is ongoing. It has led to new friendships and new projects, but most importantly, new ways of seeing the landscape that she grew up on. As a rural practice, CSA takes on a wide variety of project typologies, from private housing, to schools, healthcare and public buildings. By far the most rewarding project they have undertaken is the design of tourism infrastructure on the Budj Bim Cultural Landscape, for Gunditj Mirring Traditional Owners Aboriginal Corporation, a project that spanned over 7 years. The Budj Bim Cultural Landscape project won the 2023 Victorian Premier’s Design Awards – Award of the Year and Best in Category – Architecture, as well as a Commendation in the 2023 Architecture AU Award for Social Impact. The project has been referenced as a case study by institutions including the Government Architect of NSW and research into protocols for indigenous-led creative practice at Monash University, as an example of ‘best practice’ for principles of designing with Country, engaging with Aboriginal communities and representing indigenous knowledge and culture. In addition to private practice, Bianca is a member of the Regional Committee for the AIA Victorian Chapter and undertakes adhoc tutoring and lecturing roles for various universities.

    THE SESSION Bianca Scaife will present CSA’s Budj Bim Cultural Landscape project as an example of ‘best practice’ in designing with Country. The Budj Bim Cultural Landscape, in southwest Victoria, has been recognised by UNESCO as a World Heritage Site with outstanding universal value. CSA have designed a range of tourism infrastructure on these sites for the Traditional Owners of this Country, the Gunditjmara. The development provides an environmentally, socially and economically sustainable means of caring for Country and ensures the continuation of Gunditjmara culture for future generations. Bianca will explain the approach that CSA took to working with the Gunditjmara community and how their cultural knowledge and understanding of Country informed the design. She will also reflect on how this experience has influenced her approach to design more broadly and provide practical advice for those who are looking to expand their knowledge of what ‘designing with Country’ means. BIANCA SCAIFE Bianca is a director of CSA, a small practice she co-founded in 2003. She lives and works on Gunditjmara Country in southwest Victoria and is committed to making an authentic contribution to the natural, cultural and built environment of this region. Bianca’s learning about the Gunditjmara, their culture and connection to Country is ongoing. It has led to new friendships and new projects, but most importantly, new ways of seeing the landscape that she grew up on. As a rural practice, CSA takes on a wide variety of project typologies, from private housing, to schools, healthcare and public buildings. By far the most rewarding project they have undertaken is the design of tourism infrastructure on the Budj Bim Cultural Landscape, for Gunditj Mirring Traditional Owners Aboriginal Corporation, a project that spanned over 7 years. The Budj Bim Cultural Landscape project won the 2023 Victorian Premier’s Design Awards – Award of the Year and Best in Category – Architecture, as well as a Commendation in the 2023 Architecture AU Award for Social Impact. The project has been referenced as a case study by institutions including the Government Architect of NSW and research into protocols for indigenous-led creative practice at Monash University, as an example of ‘best practice’ for principles of designing with Country, engaging with Aboriginal communities and representing indigenous knowledge and culture. In addition to private practice, Bianca is a member of the Regional Committee for the AIA Victorian Chapter and undertakes adhoc tutoring and lecturing roles for various universities.

    $35.00 + $1.38 fee
  17. RAA In Practice | Alternate Dispute Resolution in Design & Construction | Wayne Black

    RAA In Practice | Alternate Dispute Resolution in Design & Construction | Wayne Black ticket

    THE SESSION In construction, disputes are common but resolving them through Alternative Dispute Resolution (ADR) methods can be faster, more cost-effective, and less adversarial than traditional litigation. ADR approaches—negotiation, mediation, expert determination, and arbitration—offer structured pathways for parties to address and resolve conflicts with flexibility and expertise. In this presentation, Wayne Black, Architect & Accredited Expert Determiner, will explore various ADR methods and demonstrate how a Dispute Resolution Specialist (as a non-lawyer) can assist in resolving disputes without legal proceedings. By leveraging industry expertise and conflict resolution skills, such specialists provide a valuable alternative to litigation, offering efficient and tailored solutions for construction and architectural conflicts. WAYNE BLACK Wayne Black has over 40 years of experience in design and construction. As a registered architect and a member of various architectural associations, Wayne also offers services such as expert determination, mediation, negotiation and expert witness reporting. Wayne completed both mediation & expert determination courses by the Resolution Institute in 2021 and has recently become an accredited expert determiner. Together with his experience, knowledge and expertise as a registered design practitioner, he offers a comprehensive skill set.

    THE SESSION In construction, disputes are common but resolving them through Alternative Dispute Resolution (ADR) methods can be faster, more cost-effective, and less adversarial than traditional litigation. ADR approaches—negotiation, mediation, expert determination, and arbitration—offer structured pathways for parties to address and resolve conflicts with flexibility and expertise. In this presentation, Wayne Black, Architect & Accredited Expert Determiner, will explore various ADR methods and demonstrate how a Dispute Resolution Specialist (as a non-lawyer) can assist in resolving disputes without legal proceedings. By leveraging industry expertise and conflict resolution skills, such specialists provide a valuable alternative to litigation, offering efficient and tailored solutions for construction and architectural conflicts. WAYNE BLACK Wayne Black has over 40 years of experience in design and construction. As a registered architect and a member of various architectural associations, Wayne also offers services such as expert determination, mediation, negotiation and expert witness reporting. Wayne completed both mediation & expert determination courses by the Resolution Institute in 2021 and has recently become an accredited expert determiner. Together with his experience, knowledge and expertise as a registered design practitioner, he offers a comprehensive skill set.

    $35.00 + $1.38 fee

Order summary

2024 RAA ONLINE EVENTS | RECORDING ACCESS
Mon, 15 Jul, 6pm 2024 - 8 Aug, 12am 2034 AEST

Subtotal (Net)0
Booking fees

Total0
Powered by  

Humanitix takes the booking fees we all hate paying and dedicates 100% of profits to charity!

Select date and time
2024 RAA ONLINE EVENTS | RECORDING ACCESS
Available
Close icon
Sold out
Join waitlist

 
 
 
 
 
 

 

Joining the waitlist does not guarantee a ticket. Availability is ultimately determined by the event host.